The Sony URX-R1 is a half 19-inch rack mountable UHF wireless microphone receiver designed for use with the Sony UWP series of wireless microphone transmitters. The receiver features space diversity reception where 2 dual receiver circuits and antenna compete for the strongest RF signal. The result is minimal drop out and interference. The rear panel features an XLR 3-pin balanced output and unbalanced 1/4" phone connections. A stereo 1/4" phone headphone output is located on the front panel. A comprehensive LCD provides channel / frequency status, audio status, diversity status and more. Up to 188 user selectable UHF frequencies are available and the angle on the dual antenna are adjustable resulting in interference free reception. The URX-1 is easily mountable on any desk surface or half 19-inch rack shelf. - • Space Diversity Reception
- The URX-R1 incorporates dual receiver circuits and dual antennas. The dual circuits compete for the strongest possible reception.
- • Comprehensive LCD Display
- The LCD provides channel / frequency, audio level, diversity status and more.
- • Balanced & Unbalanced Output
- The rear panel provides balanced XLR 3-pin and unbalanced 1/4" phone outputs. A stereo 1/4" phone headphone monitor output is located on the front.
| Specification | Detail | | | | | | Half Rack - Crystal Controlled PLL Synthesizer
| - RF Carrier Frequency Range
| Channels: 62 (758 to 782 MHz) and 66(782 to 806 MHz) | | | 400 feet (approx) | - Overall Frequency Response
| 50Hz to 18kHz (typical) | | | 60dB or more (+/- 5kHz deviation @ 1kHz modulation, A-weighted) | | | 188 | | | XLR 3-pin male balanced 1/4" Phone unbalanced | | | Stereo 1/4" Phone | | | DC 9.0 V | - Battery Type/Approx. Life
| AC/DC Power Only | | | LCD: channel/frequency, audio-output status, RF-input level LED: RF-input status | | | Rack Mountable | | | 1/4 wave length wire | | | 8.35 x 1.73 x 8.23" (212 x 44 x 209mm) (WxHxD) | | | Approx. 1.3 kg (2 lb 14 oz) | |